DPMS 3G2 Rifle in 5.56mm (Gun Review & Test)

By Max Lorenzen CA - Tuesday, July 14, 2015
Hello,.,. folks of Max Guns Issue, this particular day i will presented to you about DPMS 3G2 Rifles.

DPMS 3G2 CARBINE-1

The use of derivatives to clean the site of the 3-Gunners are likely to be only the tip of the iceberg before declining influence of the competition. Rifles, equipment, rifles, pistols and optical-continually refined by the use of intensive and demand from competitors. LEO can benefit from a rifle recently harvested 5.56mm 3-Gun-chamber, which is designed specifically for the sport, which is lightweight, practical and versatile. One is a new DPMS 3G2 rifle, the latest iteration of "off the shelf" 3-Gun-rifle particular company.

 

Gun Details

DPMS Panther Arms began life in 1986 with the production of mil-spec parts for Uncle Sam. One thing led to another, and eventually began producing DPMS complete rifle, and from there, the company has been in the civilian market.

The 3G2 is the first rodeo "DPMS or first off-the-shelf 3-Gun rifle company. The company was an early supporter of 3-Gun competitions and offers one of the first purpose-built EI 3 -gun that 3G1. Now, with the participation of 3-Gunners, DPMS has enhanced its popular rifle 3G1 with cutting weight (more than 6 ounces) and barrel lengths (up to 16 inches) while adding features and changing.

The forged, hardcoat anodized 7075-T6 lower and upper A3 receptors flattop provide the basis for 3G2. This receptor has the standard features expected: non-lit magazine well, voter safety one hand, a news magazine is protected by a fence, cover and bolt nitrided mil-spec and carrier.

DPMS 3G2 CARBINE-6

Charging handle, however, seems to be a Badger Ordnance Gen 1 tactics latch for easier handling under stress or in low light. In this configuration colleagues DPMS 16-inch, matte finish, 416 stainless steel, with a lightweight barrel twist rate 1-for-9 inches. A black Compensator Jerry Miculek is known to effectively reduce muzzle climb, so that tracking shots faster and faster acquisition targets to successfully cap barrel.

"The DPMS 3G2 RIFLE is evidence that the competition often give birth to equipment that will win - On the beach and in the street"

Around the barrel, carbine length gas system and a low profile gas block 12.25 inches, DPMS modular M111 free-floating handguard. Hard anodized aluminum alloy jacket M111 handguard package (about 2 inches in diameter), octagonal in shape and light with lots of openings for better cooling. (In fact, all parts 3G2 hardcoat anodized aluminum alloy, with carbon steel parts to receive nitride finish.) The M111 slenderness DPMS should make it perfect for officers with large or small hands. Only part of the rail M111, top rail, a good friend with senior flattop, and the design allows the user to add the rail segments of different lengths when necessary for the installation of accessories such as light and laser.

DPMS 3G2 CARBINE-4

DPMS 3G2 CARBINE-5

DPMS rifle ships with two rail segments are mounted. Two rail mounted 2.5 inches long around 2:00, offset 45 degrees to the front and rear hand guards. One option 4.5 inches long rails can be mounted in position 06 o'clock in front of the handguard. Magpul low profile, lightweight, fold-up, Polymer MBUS Gen 2 sites that are mounted on rails 2 short hours. Relocation tracks and sites can be installed on the left side. The original idea of ​​the competition 3-Gun, installed at 45 degrees sites offer users a simple alternative, fast and effective for shooting large optical primary should be damaged or have too much to gain magnification and the target. Not only a rifle, selecting sites and shoot.

DPMS 3G2 CARBINE-7

The 3G2 carry one compact adjustable Magpul stock, STR (Storage Type / restricted), with cheekweld an improvement over its predecessor, CTR, and two waterproof storage unit. STR includes several other desirable characteristics. Hook location is designed to prevent accidental activation, and additional friction lock minimizes stock "wobble" is automatically deactivated by hooks. Lack of wobble can mean the difference between right and missing the shot placement seen the head of the perpetrator. A rubber buttpad replaced, up traditional sling and ambidextrous round quick release mount on STR (QD) rotate.

In the standard trigger guard 3G2, DPMS adding one of the triggers of two phases, which on my test rifle erupted five pounds several times with a small amount of wheat. Behind the bridge is Hogue rubber pistol brought to hand comfortably and efficiently. Heavier than some of the A2, is much more ergonomic.

 

Time span

DPMS 3G2 CARBINE-3

Completing a variety of guns for the visit was a bit more complicated than pushing a gun in the holster and go. Because I want to eliminate as many variables as possible, a new rifle scope Battlezone Redfield appears to be a very good choice to wipe 3G2 on at 100 yards and beyond. It has been designed to work with AR platform and has all the features you could ask for, including TAC-MOA reticle with stadia lines on the reticle horizontal and vertical rise of 1 MOA drift or fast rising survival. Redfield scope Battlezone also have compensated the decline bullet calibrated to 5.56mm mm NATO. I ride in Redfield (parent company of Redfield) Leupold Mark 4 Integrated Mounting System (IMS) for stability. The scope is so clear and sharp that individual bullet holes in five rounds, 100 yards a group that is easily visible.

DPMS 3G2 CARBINE-8

3G2 excellent accuracy with an "average average" impressive 0.82 inches and the best images all around 0.7 inches. It even includes 60- and 65-point load test, which usually are not supposed to be the best choice for barrels 1-in-9-inch touch. The gate 3G2, while not necessarily the target version, certainly worthy struggle, worked well enough to produce these groups.

Then I plugged one new 1.5-4x20mm Leupold Mark AR MOD 1 oscilloscope with illuminated reticle rifle using Leupold Mark 4 IMS another. The assembly of solid rock and the scope has been very clear, very well done. Various such reproduced what I thought to be used in the guard patrol rifle ready he is capable of long-term precision and CQB work.

DPMS 3G2 CARBINE-9

To evaluate the effectiveness of the CQB 3G2 on a number of exercises, I alternated between using a Leupold scope and Aimpoint Patrol Rifle Optic (PRO). PRO is a different kind of perspective, I would expect to see on a patrol rifle, possibly with a 3X magnifying glass mounted behind it. The Optics and 3G2 done properly, and illuminated reticle of the Leupold scope is a nice bonus.

To test the effectiveness of the system provided for shifting 3G2, I worked with him for 10 to 50 yards. Conventional shades rifle swinging 45 degrees become less visible with use. Although my group for a 50-yard precision will not win the contest, they had enough to do a good job. In fact, I even put five shots in the center of IDPA targets at 100 yards. Within 50 yards, putting the site hit the target repeatedly.

Compensator Miculek performed superbly, allowing fast tracking shots in CQB part of the test. Muzzle really did not seem to move. The breath of his mouth, however, did not attract the attention of some nearby shooter.

Because the patrol rifle worth sling, sling tied me Ares Armor MK II Huskey EWS. Billed as bearing "the name and seal of approval of the Navy scout sniper instructor and 2009 winner Josh Huskey International Sniper Competition," sash be a great artist. SAP is the solution to the debate on tightening the sling two points of the cam-system or cursor. With all-metal material, slider EWS ensure rapid adjustment when necessary and tighten when needed to cover the rifle near the body when the operator must go "hands-free". He works as advertised and is really impressive.

To complete the set, I added green / combining unit Laser light Streamlight TLR-2G. The TLR-2G, which is operated by a switch ambidextrous, securely fastened to the fence. A single CR123 battery leads to the light and 200 lumens of 522nm to 542nm green laser for 1.25 hours.The products TLR-2G, strong light works well with DPMS 3G2 RIFLE.

 

FINAL NOTE

After testing, I was able to find a con to DPMS 3G2 RIFLE, and falls under the auspices of personal preference. Effective Miculek Compensator must do a great job in the competition and the officers involved in the confrontation. However, if I am in the team entries, the noise compensators can be detrimental. It should be the decision of each officer, case by case.

DPMS 3G2 CARBINE-2

DPMS 3G2 RIFLE, with different optics used, Streamlight TLR-2G and EWS sling, made a very good package for patrol rifle / services. The headrest M111 is a great feature; it feels good in the hand and frankly rifle and cool. I am pleased DPMS decided to shorten and simplify the morphing 3G1, 3G2 in.

DPMS 3G2 RIFLE is evidence that competition-winning frequent cause of equipment on the beach and the street!

For more information on the 3G2, visit dpmsinc.com or call 800-578-3767.

//Infolinks ADS CODE