Latest Posts
Browsing Category "Ruger"

Ruger AR/SR-556 and aR-762 (Gun Review)

- Tuesday, August 25, 2015

Ruger-AR-556-1
MaxGunsIssue - Ruger AR-556 And AR-762 is a special firearm that can be used and ready for any situation, it has taken tactical market with a vengeance in recent years, especially when it comes to a platformer rifle AR.
Ruger SR-556 has been providing high quality AR piston to the masses at the time the cost of all of the stratosphere. But the loyal fans and knowledgeable consumers have called AR simple, profitable Ruger gas system uses proven direct impact. Ideal for most users, the direct impact of AR rifles simple, lightweight, reliable and cheaper. Some American firearms business is better suited for this task Ruger, with a rich history of building high quality products at reasonable prices. Bring mentality to the AR-556 is a perfect match.
Top and bottom receiver forged 7075-T6 aluminum to build a foundation for the AR-556. Type III hard anodized coating makes is built to last longer. Receiver is builded in chrome moly steel cold hammer forged. Measuring 16.10 inches, meaning the barrel contour to provide the level of touch 1-en-8-inch, 5.56 and the chamber-style M4 feed ramps. Although already equipped with a flash suppressor, ½x28 standard threading allows the barrel to also receive the standard suppressor.
AR-556 using the bolt carrier with chrome oxide coated interior and staked gas key. Built from 9310 steel, it exploded and magnetic particles (MP) are tested. It covers the ejection port cover, an attacker assistance and brass deflector.
Gun handlebar is ground and including the jagged, cut glare, while the flip-up rear sight adjustable for drift. A2 becomes high standard, this unit will work with the entire rear view have a cup of QD flush on the bottom. Fore-A2-style constructed from glass filled nylon heat-resistant and has a ring delta for repair. Simply open the ring and everything M4 handguard-compatible can be added without using any tools.
A MIL-SPEC, the buffer tube holding six lacrosse position M4 style AR-556. Ruger also adds an ergonomic trigger handle to achieve better and enlarged trigger guard. Triggers in one step is crisp and predictable. Delivered in a cardboard box with foam boats, each AR-556 including Magpul PMAG, keys and instruction manual.

Range Reports

I started my testing with the accuracy of the site of iron and 0.223 rifle rounds federal THE question my service tactics and tour popular services. Most who buy these guns will begin with iron sights. Than 50 kilometers from a kneeling position, it is possible to keep everything inside the circle 6 inches. Moving stomach, half the size of the group. It is more than accurate enough for most of the commitments in the real world in the capacity to defend themselves or tasks. At 25 yards and closer, the AR-556 is as accurate as receiving platform. Stretching up to 100 yards, the gun is suitable for the use of the task, taking due within 2 inches. My feeling is that the gun is more accurate than I am today with iron sights, but will serve well in most environments.
A EOTech EXPS3 has been set for the group and chronographing official test. The EOTech sighting system is still one of the most popular police rifles. It's just a mountain, co-control board website and priced fairly. 77 grain OTM tower Silver State Armory grouped to the right an inch. TAP 60 grain Hornady give the same result. Everything is less than 2 inches in this range. Comparatively speaking, the AR-556 as accurate as most side effects of the purchase of shares, I tested in recent years. No one bothered on this rifle.
AR-556 I ran hard on the beach and never fail. During the filming of a rapid-fire string on each side, upside down, from a strange position and even with a shoulder careless, he always worked. Clean or dirty, and with all kinds of ammunition, rifle performed well.
Most tests were performed using the Black Hills refills, and he never misses. He works with all PMAG, mil-spec aluminum and magazines Lancer whether they are loaded with a tour of duty or FMJ ammunition. Gun remained clear throughout. It was a little hot under the handguard for sustained fire, but that's normal. Under normal conditions, the factory hand guard is fine. AR-556 to handle everything that is thrown without a question.
Ruger has really nailed it with the rifle, and its popularity gives strong evidence of this. It is easy to use, lightweight, accurate and reliable, all for a price that will not break the bank.

Piston Power

AR causes the piston Ruger rifle come on when the side effects are too expensive in general, with the leading pack of the piston arms. The rifle uses a gas piston system of encouragement really reliable generally starts at $ 2,500 and go from there. Many of 7.62 rifles to nearly $ 4,000. Ruger SR-556 5.56mm cut in half with a package that has provided all you need to hit the beach. While prices have stabilized, Ruger SR lineup remains one of the best buys on the market thanks to its robust features, reliability and attention to detail.
Originally built to meet military contracts that require sustained automatic fire, the barrel of the SR series is quite large. It was also designed to include an easily removable feature, which is important on the gun is designed to heavy fire. With customers demanding CA, Ruger has decided to bring civil-law rifle with a quick release system of the barrel less the same.
That changed this year, however, with the introduction of fast detachment barrels a much thinner, reducing weight without sacrificing accuracy or reliability. Just pinch and pull, rotate the barrel and it seems to come directly; reversing the installation process. Initially available in 300 BLK and 5.56mm, the design biodegradable and holds up well in one case Ruger Takedown. Futures SR-556 rifle barrel came with it.
 
Ruger-SR-556-Firearms-2
The new Ruger SR-556 was chambered in 5.56mm, using a piece of M4 style for reliability and has a barrel with the level of touch 1-for-9 inches. Chrome doubled cold hammer forged, the barrel is also adapted to both intensive use and accuracy. Easily removable, it can be replaced with separate barrels of different lengths and sizes. All the barrels would be appropriate to use cannon yarn and will be equipped with removable flash suppressor.
A railed handguard provides space for light, laser or other assistance for temporary cover piston system with two floors. A gas block in fourth position allows the user to customize the different styles of ammunition and the use of suppressors.
Forged upper and lower receivers offer proven strength and operation. Ruger bolt support is a one-piece unit that is built to exceed the MIL-SPEC standards for strength and durability. Monogrip Hogue pistol grip to provide comfort when M4 style, six lacrosse friends position rifle to your shoulder. Ruger folding iron sights are provided and attach to the top rail. PMAGs equipped with three 30-round, the gun is ready for action right out of the box.
Starting this year, the SR-556 barrels will be available at 300 BLK. Each cylinder 300 includes a block BLK gas installed and the front view, and magazines that are clearly marked for the measure to prevent the accidental insertion of the wrong ammunition. Cold hammer forged barrel and chrome-plated using a rate of 1-by-8-inch touch-optimized for the most popular load. Shooting rifle SR 556 is equipped with one of the new BLK 300 barrels at a recent media event, I found it unreliable with supersonic ammunition, both with and without the silencer fitted. 300 BLK rifle accuracy test is very good, and has proven itself well.

7.62 Sentinel

Ruger-SR-762-Firearms-3
At the heart of Ruger SR-762 rifle in .308 Win. is sound, chrome-plated, hammer forged barrel striped accuracy. Constructed of chrome molybdenum steel 41V45, ensure the accuracy and longevity. Fluted to save weight and offer 5/8 × 24 threads and including flash suppressors Mini-30 style. Torque levels of the 1-by-10-inches from the barrel provide ammunition operations with the most extensive in the market. Adjustment differences achieved with gas supplies to four positions and piston system with two floors rifle. Ruger bolt and the support bolt chrome plated for easy cleaning and reliable operation under harsh conditions.
Round, soft side, lightweight Ruger includes handguard barrel. The rails can be added to position 3, 6 and 9 o'clock. Monogrip Hogue help keep things under control, and the six positions, M4 style stock sitting on mil-spec buffer tube diameter. Three 20-round Magpul PMAGs included with SR-762, with three fingers grooved rail cover, all in a soft case.
Ruger continues to lead the way in terms of proven reliability, simplicity of design and the price of everyday consumer oriented. Rugged, reliable, thoughtful and precise,Ruger AR and SR rifle line continues to impress.

For more information or this gun price, visit ruger.com.





















New Ruger’s .22LR Charger Takedown 2015

- Thursday, August 20, 2015

 

New-Ruger-22-LR-Charger-Takedown-1

I saw my first Ruger 22 Charger shortly after it was introduced in 2007. It was a single gun fire, cross-searching among very popular Ruger 10/22 rifle and rimfire pistol. At first glance, it looked like no fish or poultry.

 

I immediately got my hands on one of these hybrids pistol to be tested. Its orthodox appearance on the charger does not love me at first. Pistol comes with a folding bipod, but odd-shaped pistol grip has a round base, which has established a solid angle on the bench shooting. Original charger wear underslung cantilevered headrest, while the upper part of the handle extended to the rear of 0.75 inches or more. It is clearly not a conventional pistol looks.

Like all Ruger 10 / 22s, the magazine shoot very well. As I recall, very good accuracy and reliability such as diet shoot. At the same time, the magazine felt awkward in my hand, and he actually asked for a shot of the remaining stationary. I have some classic 10/22 rifle, and the first charger never really entered. I finally returned to the Ruger when the test is over.

Launched Rimfire

New-Ruger-22-LR-Charger-Takedown-2

For some reason, this charger and then abandoned. It has now been redesigned and reintroduced in two (much better) separate versions. The most interesting is the model Takedown, which borrows this function from the ever popular 10/22 Takedown rifle.

The ingenious design of the barrel with external locking lug rotating in the slot in the receiver. Rotating knob that adjusts the gap to the minimum size for the cylinder lock firmly into place. I gained 10/22 Takedown rifle shortly after he appeared on the scene. This function has an undeniable appeal to shooters gadget mind.

Another feature that catches your attention is a threaded muzzle, which appeared in the second variant. This allows the installation suppressor loans.

Now suppressor is a good idea. While most people pay little attention to the report that seemingly innocuous created by rimfire firearms, the reality is that this weapon fires a small decline actually generate enough decibels to cause permanent hearing damage. I was finally convinced that years ago while testing some 0.22 on the beach. Because the sound does not seem to be made "hurt" my ears, I follow my usual practice of dispensing with hearing protection. After firing several rounds, I developed a mild headache. Given what I want, after reading about hearing damage rimfire, I placed the type of arm to protect my ears and headaches soon disappeared and I pulled the group gets smaller. This leads me to believe. Since then I have worn hearing protection whenever I shoot any firearm. After all, irreversible hearing damage.

A gun was removed Charger creates less noise, received when shooting near inhabited areas or trying to clean up a prairie dog town without scaring the nearest target.

Full package

Assembly / disassembly Takedown charger is simplicity itself. Once the location has been adjusted properly sized, the gun is inserted in the receiver and turned to the right until it locks into place. Then you turn the knob a barrel opposite to the anchor in place. Drilling is to squeeze as many buttons as you can, and screw a turn or two. Finally, pull and release the charging handle several times with empty space (first make sure the gun pointed in a safe direction). It accommodates the barrel assembly. I do that every time I gathered the charger, and a pistol was held reliably zero.

Sparked each feeder is very good. Both weapons registered even £ 4 hire-off without creeping discernable but some overflow. Both weapons were revised and expanded crossbolt showing positive safety Ruger. Each feeder is equipped with a BX-15, a new brand Ruger magazine. Unlike the standard Ruger 10/22 magazine, the design characteristics, wide curved body that projects from the bottom receiver. It holds 15 rounds and it seems as reliable as flush cousin. There is also a 25-BX-25 round magazines available but the project was too far away to be convenient when the charger is pulled from the bench.

Pistol is also equipped with a short, folding bipod, which is a big help when cooking bench. I find this the most convenient way to use this weapon. Off-hand shooting awkward, holding rifles and heavy pistol at arm's length tiring and less accurate. In short, this is a pistol, and is designed for use on a bench or some kind of radical.

Standard charger allows for quick bipod attached or detached front sling swivel. Takedown version requires an adapter (supplied) to this annex. Both loader new features AR-15 pistol grip synthetic style, which I find better for carved wooden handle was found in the original charger. Takedown charger has a laminate shares of Green Mountain, while the standard version has a layered brown background.

Perfect plinker

New-Ruger-22-LR-Charger-Takedown-3

I have a red-dot scope UTAC tactics Picattiny the rail gun. Original charger has a less flexible rail mounted less than optics. This new rail, however, receive most of the sites.

When I pulled the pistol from benchrest 50 yards, an average of a regular group of about 1 inch mark. The group of five best shots measured 0.75 inches between centers, while the worst goes to 1.25 inches. This is a very good performance (and consistent) This small hybrid. When I took the standard charger, the results are almost identical.

BX-15 standard magazines and new rotary can really rely on. As for his own weapon, charger proven reliability is absolutely perfect, which is not surprising with star food and interesting notes Ruger 10 / 22s have long been famous.

 

For more information, visit ruger.com.

Ruger SR-556 Takedown

- Monday, July 27, 2015
MaxGunsIssue - With ease of maintenance in mind, introducing new Ruger SR-556 autoloading rifle Ruger TAKEDOWN, an innovative touch to the already innovative rifle.
As the popular Ruger 10/22 TAKEDOWN, TAKEDOWN SR-556 has been designed with ease of use in mind. The barrel removed from the top of the receiver simply by moving the cursor to the head, rotate the barrel and pull it free - without tools.
Installation is simple - just drag the cannon on the top and rotate until locked. Withdrawal mechanism provides a reproducible and employs the point of impact, chrome operating system patent pending two-stage piston causes the vacuum cleaner, runs cool, reliable weapon that is truly on the cutting edge of technology.
The detachable 16.1 "chrome-plated, cold hammer forged barrel Mil-Spec 41V45 chrome-molybdenum-vanadium steel is booth in 5.56mm NATO. Permission is set at the factory no adjustment is required.
The barrel assembly includes a flip-up handle elevation and shift adjusted so that zero rest with the barrel. SR-556 also sports a short TAKEDOWN flash hider on Ruger ½ "-28 threaded muzzle.
MSR shooters who want a larger cartridge will be pleased that the kit barrels retrievable chamber at 300 AAC Blackout available on Shop Ruger.com. 300 AAC Blackout cold hammer forged barrel is 16.1 "long, has a 1: 7" twist, and limited by the 5/8 "-24 threaded muzzle flash hider with the Ruger headspace. Loan barrel-end is fixed at the factory and equipped with flip-up metal elevation and drift-adjustable front sight and two 30-round magazines of metal marked with "300 AAC BLACKOUT" to ensure easy differentiation.
SR-556 TAKEDOWN retains elements of the best in their category and the SR-556 comes standard with a number of accessories that shooter in demand today. The quad rail handguard provides ample space for mounting accessories and provide rigid support and safe for the withdrawal mechanism.
Scroll bar to remove the cylinder is located on the lower rail under the gas block and clearly accessories. Top receiver complete with a protective cover, before helping, and metal adjustable rear view flip-up drift. All hardcoat anodized aluminum parts.
Elite 452 Ruger two-stage trigger mounted on the lower receiver mil-spec standard model. 7 pounds 10 ounces, SR-556 TAKEDOWN is easily handles with the effect Magpul MOE and SL shares on the stock tube buffer mil-spec.
Three 30-round magazine Magpul PMAG and three full-length rails include with a SR-556 TAKEDOWN in the case of rugged ballistic nylon.
For more information on the SR-556 Takedown and other products from Ruger, please visit Ruger.com.









Law Enforcement AR-15 Rifles Under $1,000 (New 2015)

- Saturday, July 11, 2015

8 Entry-level 5.56mm AR-15s built for quality without breaking the bank!

As fiscal belt in many departments began to tighten, agencies and individual agents began looking affordable AR-15 rifles to patrol work.

Threats against the police and the citizens they serve have not gone just because the station's equipment. And in the civilian world, money can be tight for many families, but your home and personal defense is always important.

Fortunately, there are several manufacturers that produce high quality weapons that will not break the bank account. All weapons in this list are recognized names in the industry, and many are ready to go to work right out of the box. get ready to read the list below.

Armalite M-15 Law Enforcement  Carbine:

1-ArmaLite M-15 Law Enforcement Carbine

The name Armalite M-15 Law Enforcement  Carbine has instant credibility with the administrator and the police on the same road. This gun has a pistol and two steps coated with chrome release. A six position collapsible butt allows the gun to adjust different sizes and officers quickly adjust when an officer don external body armor. MSRP is $ 989. armalite.com; 800-336-0184

Bushmaster Carbon-15 M4 Quad Rail:

2-Bushmaster Carbon-15 M4 Quad Rail

Bushmaster rifle served the law enforcement community for decades, and carbon-15 M4 Quad Rail is an affordable option for a department that requires a new long-range weapons. Mission First Tactical handguard polymer allows the addition of various accessories, such as a light or white vertical foregrip. The rifle uses a composite receiver lower and upper aluminum receptors. MSRP is $ 866. bushmaster.com; 800-998-7928

Del-Ton Echo 316 MOE:

3-Del-Ton Echo 316 MOE

With Echo MOE 316, Del-Ton offers a lot of value by combining quality semi-automatic AR-15 with Magpul MOE furniture. Magpul provide handguard, pistol grips, adjustable stock and a 30-round magazines for the rifle. Recipients forged and hardcoat anodized. A Picatinny rail on the top of the top to allow the site and optics. MSRP is $ 858. del-ton.com; 910-645-2172

Diamondback DB15SB:

4-Diamondback DB15SB

A newcomer in the market served rifle, Diamondback produce solid AR-15 rifle with a very affordable price. Both upper and lower receiver forged from 7075-T6 aluminum, with the top of the unit of A3 flattop style. 16-inch chrome-molybdenum barrel topped with A2-style flash suppressor to reduce the flash signature reduction when shooting at night the weapon only cost. MSRP is $ 756.diamondbackfirearms.com; 877-997-6774

DPMS AP4 Carbine:

5-DPMS AP4 Carbine

As one of the best-selling weapons catalogs DPMS, which AP4 Carbine has been tested and proven in the hands of law enforcement officers across the country. Rifle is ready tasked with adjustable stock, chrome-plated barrel and Glacier Guard handguard. The carry handle is released to select the shooters to add perspective. MSRP is $ 959. dpmsinc.com; 800-578-3767

Ruger AR-556:

6-Ruger AR-556

Some companies enjoy the same reputation for Ruger durability . The quality of construction is deferred to the Ruger AR-556, which is surprisingly affordable AR-15 rifle. American-made rifles using the operating system directly impacts the standard gas. Cold hammer forged barrel threaded and has an average contour. The Ruger AR-556 is ready out of the box with the patient help, insulating brass ejection port cover and fold vision. MSRP is $ 749. contact ruger.com

Smith & Wesson M & P15 Sport:

Smith & Wesson M & P15 Sport

Many law enforcement officers already carry a Smith & Wesson M & P rifle platform of their duties, to add M & P15 rifle in a patrol car can make a lot of sense. This weapon has a direct impact A2-style handlebars and rear folding MBUS Magpul sites. A Picatinny rail allows the shooter to add the glass as well. Magpul also provides a 30-round magazine that is delivered with the pistol. MSRP is $ 739. smith-wesson.com; 800-331-0852

Windham carbon fiber Armament RSC:

Windham Weaponry Carbon-Fiber SRC

Lighter Rifle in the attack, Windham Armament using carbon fiber composites formed receiver to keep the total weight of the Windham carbon fiber Armament RSC under 6 pounds. In addition to weight loss, the composite receiver offers better heat dissipation and not have completed that will be used. The barrel is chrome plated, and the gas supply low profile. A lifetime appointment to make sure the company will stand behind the rifle. MSRP is $ 846. windhamweaponry.com; 855-808-1888

//Infolinks ADS CODE